Realglow Warmpact Rattan Table Gas Fire Pit (Black, 80cm x 80cm)

What size gas cylinder does this fire pit require?

The fire pit is designed to work with standard 13kg patio gas cylinders (propane). These red cylinders are widely available at garden centres, DIY stores and fuel stations. The 27mm clip-on regulator included fits these cylinders perfectly. You can also use smaller 6kg cylinders which fit underneath the table, though larger cylinders provide longer burn times.

How much heat does the 13KW output actually provide?

The 13KW output translates to approximately 44,000 BTU of heat, which effectively warms an area of roughly 4-5 metres radius. This is sufficient for 6-8 people seated around the fire pit on cool evenings. The heat output is comparable to a medium-sized patio heater but with the added ambience of real flames.

Is assembly difficult and what tools are needed?

Assembly typically takes 30 minutes and requires only basic tools like a screwdriver. The rattan base comes in sections that bolt together, whilst the glass top and burner unit simply slot into place. All necessary fixings are included and the instruction manual provides clear step-by-step guidance with diagrams.

Can this fire pit be left outside permanently?

Yes, the fire pit is designed for permanent outdoor installation. The rattan material is weather-resistant and the included waterproof cover provides additional protection against rain and snow. However, disconnecting and storing the gas cylinder indoors during winter months is recommended for safety and cylinder longevity.

How does the glass windshield affect the flames?

The removable glass windshield protects the flames from being blown out by wind whilst still allowing heat to radiate outward. Some users remove the windshield for maximum heat output, though this makes the flames more susceptible to wind interference. The windshield also provides a safety barrier around the flame area.

What maintenance is required for this fire pit?

Maintenance is minimal compared to wood-burning alternatives. Regular cleaning of the glass surfaces with standard glass cleaner keeps the appearance pristine. The lava rocks should be rearranged occasionally to ensure even flame distribution. Annual checks of gas connections and hose condition ensure safe operation.

Does the glass top get too hot to touch during operation?

The tempered glass surface around the burner area becomes very hot during operation and should not be touched. The outer edges remain cooler but caution is still advised. Allow at least 30 minutes cooling time after extinguishing before handling any glass components or placing items on the surface.

Can this fire pit be used for cooking food?

This fire pit is designed primarily for heating and ambience rather than cooking. The glass surface and rattan construction are not suitable for placing cookware directly on the unit. For cooking applications, consider a dedicated barbecue or fire pit specifically designed for food preparation with appropriate cooking surfaces.